#Crystaldiskinfo alternative install
#Crystaldiskinfo alternative serial
#Crystaldiskinfo alternative software
#Crystaldiskinfo alternative Offline
#Crystaldiskinfo alternative windows

It can also save and load the SMART data of your hard drives for offline analysis. GSmartControl can notify you if any of your hard drives have SMART errors or failures. It can also run various self-tests on your hard drives and check their health status. It can display the identity information, capabilities, attributes, error logs, self-test logs, and selective self-test logs of your hard drives. GSmartControl is a graphical user interface for smartctl, a command-line tool for controlling and monitoring the SMART features of hard drives. It can also perform various tests and benchmarks on your hard drives to verify their functionality and reliability. Hard Disk Sentinel can alert you if any of your hard drives are failing or have bad sectors. It can also monitor the SMART attributes of your hard drives and provide detailed reports and statistics.

It can measure the transfer speed, seek time, power consumption, temperature, noise level, and other parameters of your hard drives.

#Crystaldiskinfo alternative software

Hard Disk Sentinel is a comprehensive software that can analyze and diagnose the health and performance of your hard drives. CrystalDiskInfo supports various types of hard drives, including HDDs, SSDs, NVMe drives, USB drives, RAID arrays, and external enclosures. It can also monitor the SMART attributes of your hard drives and alert you if any of them are in a critical condition.

#Crystaldiskinfo alternative serial

OS: ubuntu 20.CrystalDiskInfo is a free and open-source software that can display detailed information about your hard drives, such as model name, serial number, firmware version, interface type, buffer size, rotation rate, temperature, health status, and more. This is how a report generated by KDiskMark looks:

#Crystaldiskinfo alternative windows

Windows compatibility is also on the to-do list.

That's because profiles support has not yet been implemented, but it's expected in a future release. You may also notice that KDiskMark has a Profile menu that doesn't do anything.

After this, to the right comes the drive that you want to test (defaults to the drive where your home folder is located), followed by the test unit, which defaults to MB/s, but you can also use GB/s, IOPS or μs (average latency). Here it's worth noting that you should pick a small size for low speed storage, like an USB stick. To the right of this is the test size (1 GiB by default), which can be changed to a value up to 64 GiB, or as small as 16 MiB. To the right of the All button you'll see a number that you can change (5 by default) - this is the number of tests to perform. Let me also mention what all the fields above the tests do, since the application lacks any information about them. From the Settings menu you can also change the interval time for individual tests. These block sizes, queues and threads can all be changed from the KDiskMark options: Settings -> Queues & Threads. This information is also shown in a tooltip, when hovering your mouse over those buttons. RND means that test measures the random performance instead of sequential. Here, SEQ means sequential, followed by the block size ( 1M), Q means queues and it's followed by the number of queues ( 8), T means threads and it's followed by the number of threads used by the test ( 1 in this example). So what are those letter and numbers shown on the buttons on the left-hand side of KDiskMark? Let's take the first test: SEQ1MQ8T1 as an example. You may also click on a specific test on the left-hand side, to only perform that test (e.g. To get started, select the disk from the top drop-down (it defaults to the disk holding your home directory), then click on All to perform all the available tests. When you first run the application you'll notice an interface similar to CrystalDiskMark, with 4 disk benchmarking tests, each with read and write columns. It's also worth noting that even though the latest KDiskMark version at the time I'm writing this article is 1.6.2, the application is quite new, having its initial release in the beginning of July 2020.

#Crystaldiskinfo alternative install

The application can also generate benchmark reports ( File -> Save) that you can use to easily share the benchmark results with others, and for future comparisons.ĭespite its name (starting with K), this Qt5 application does not have any KDE-specific dependencies, so you can install it no matter what desktop environment you're using without having to install a large number of dependencies. Under the hood, it uses FIO (Flexible I/O Tester), and it features configurable block size, queues, and threads count for each test. KDiskMark comes with a simple user interface, very similar to the one used by CrystalDiskMark, with presets. KDiskMark is a free and open source alternative to CrystalDiskMark (which is Windows only) for Linux, a GUI HDD / SSD benchmarking software.